sched/spinlock: Replace critical_section with spinlock. by wangzhi16 · Pull Request #18270 · apache/nuttx

wangzhi16 · 2026-01-30T06:18:54Z

Summary

This PR aggregates three closely related architecture-level changes that optimize critical-section handling on various ARM platforms by replacing broad critical-section locks with more targeted spinlocks or mutexes. The goal is to clarify locking responsibilities, reduce contention, and improve system responsiveness.

Included Commits

b4f7a03 — arm64/common: Critical Section Optimization. — wangzhi16 (2025-06-20)
- Replace broad critical_section usage with spinlocks to protect distinct resources.
23f98ce — arm/phy62xx: Critical Section Optimization. — wangzhi16 (2025-06-20)
- Narrow critical-section scope by using more appropriate synchronization primitives (spinlocks) in PHY62xx code.
90be4bc — arm/rtl8720c: Critical Section Optimization. — wangzhi16 (2025-06-20)
- Replace critical_section with spinlock or mutex where appropriate in RTL8720C driver code.

Rationale

Replacing coarse-grained critical_section usage with per-resource spinlocks/mutexes:
- Clarifies which resource each lock protects, improving maintainability.
- Reduces contention and blocking time for unrelated subsystems, improving responsiveness.
- Enables finer-grained concurrency and potential performance benefits on multicore or high-interrupt-rate systems.

Impact

Functional: No intended change to higher-level behavior; synchronization semantics should remain correct while reducing unnecessary blocking. Care must be taken to preserve lock ordering where multiple locks are acquired to avoid deadlocks.
Performance: Expected reduction in contention and improved system responsiveness, particularly under high concurrency or interrupt load.
Compatibility: Source-level changes; should compile normally. Reviewers should verify there are no subtle ordering or memory visibility regressions introduced by replacing enter_critical_section/leave_critical_section with spinlocks/mutexes.

please ignore the mix case warning:

Error: /home/runner/work/nuttx/nuttx/nuttx/arch/arm/src/phy62xx/irq.c:194:5: error: Mixed case identifier found
Error: /home/runner/work/nuttx/nuttx/nuttx/arch/arm/src/phy62xx/irq.c:196:5: error: Mixed case identifier found
Error: /home/runner/work/nuttx/nuttx/nuttx/arch/arm/src/phy62xx/irq.c:199:5: error: Mixed case identifier found
Error: /home/runner/work/nuttx/nuttx/nuttx/arch/arm/src/phy62xx/irq.c:202:5: error: Mixed case identifier found
Error: /home/runner/work/nuttx/nuttx/nuttx/arch/arm/src/phy62xx/irq.c:205:5: error: Mixed case identifier found

Testing

Build validation

./tools/configure.sh -l amrv7a:smp
make -j$(nproc)

Functional tests

ostest

PASS

NuttShell (NSH) NuttX-12.12.0
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=7

user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="ostest"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 4 4
mxordblk 79d7878 79d7878
uordblks 636c 636c
fordblks 79da510 79da510

user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 4 4
mxordblk 79d7878 79d7878
uordblks 636c 636c
fordblks 79da510 79da510

user_main: libc tests

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 4 4
mxordblk 79d7878 79d7878
uordblks 636c 636c
fordblks 79da510 79da510
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 4 5
mxordblk 79d7878 79d7878
uordblks 636c 634c
fordblks 79da510 79da530
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has no value
show_variable: Variable=Variable3 has no value

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 5 4
mxordblk 79d7878 79d7878
uordblks 634c 62d4
fordblks 79da530 79da5a8

user_main: setvbuf test
setvbuf_test: Test NO buffering
setvbuf_test: Using NO buffering
setvbuf_test: Test default FULL buffering
setvbuf_test: Using default FULL buffering
setvbuf_test: Test FULL buffering, buffer size 64
setvbuf_test: Using FULL buffering, buffer size 64
setvbuf_test: Test FULL buffering, pre-allocated buffer
setvbuf_test: Using FULL buffering, pre-allocated buffer
setvbuf_test: Test LINE buffering, buffer size 64
setvbuf_test: Using LINE buffering, buffer size 64
setvbuf_test: Test FULL buffering, pre-allocated buffer
setvbuf_test: Using FULL buffering, pre-allocated buffer

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 4 4
mxordblk 79d7878 79d7878
uordblks 62d4 62d4
fordblks 79da5a8 79da5a8

user_main: /dev/null test
dev_null: Read 0 bytes from /dev/null
dev_null: Wrote 1024 bytes to /dev/null

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 4 4
mxordblk 79d7878 79d7878
uordblks 62d4 62d4
fordblks 79da5a8 79da5a8

user_main: FPU test
Starting task FPU#1
fpu_test: Started task FPU#1 at PID=8
FPU#1: pass 1
Starting task FPU#2
FPU#2: pass 1
fpu_test: Started task FPU#2 at PID=9
FPU#1: pass 2
FPU#2: pass 2
FPU#1: pass 3
FPU#2: pass 3
FPU#1: pass 4
FPU#2: pass 4
FPU#1: pass 5
FPU#2: pass 5
FPU#1: pass 6
FPU#2: pass 6
FPU#1: pass 7
FPU#2: pass 7
FPU#1: pass 8
FPU#2: pass 8
FPU#1: pass 9
FPU#2: pass 9
FPU#1: pass 10
FPU#2: pass 10
FPU#1: pass 11
FPU#2: pass 11
FPU#1: pass 12
FPU#2: pass 12
FPU#1: pass 13
FPU#2: pass 13
FPU#1: pass 14
FPU#2: pass 14
FPU#1: pass 15
FPU#2: pass 15
FPU#1: pass 16
FPU#2: pass 16
FPU#1: Succeeded
FPU#2: Succeeded
fpu_test: Returning

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 4 7
mxordblk 79d7878 79d2878
uordblks 62d4 8484
fordblks 79da5a8 79d83f8

user_main: task_restart test

Test task_restart()
restart_main: setenv(VarName, VarValue, TRUE)
restart_main: Started restart_main at PID=10
restart_main: Started with argc=4
restart_main: argv[0]="ostest"
restart_main: argv[1]="This is argument 1"
restart_main: argv[2]="Argument 2 here"
restart_main: argv[3]="Lastly, the 3rd argument"
restart_main: Variable=VarName has value=VarValue
restart_main: I am still here
restart_main: I am still here
restart_main: Started restart_main at PID=10
restart_main: Started with argc=4
restart_main: argv[0]="ostest"
restart_main: argv[1]="This is argument 1"
restart_main: argv[2]="Argument 2 here"
restart_main: argv[3]="Lastly, the 3rd argument"
restart_main: Variable=VarName has value=VarValue
restart_main: Started with argc=4
restart_main: argv[0]="ostest"
restart_main: argv[1]="This is argument 1"
restart_main: argv[2]="Argument 2 here"
restart_main: argv[3]="Lastly, the 3rd argument"
restart_main: Variable=VarName has value=VarValue
restart_main: Exiting

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 7 7
mxordblk 79d2878 79cf878
uordblks 8484 94bc
fordblks 79d83f8 79d73c0

user_main: waitpid test

Test waitpid()
waitpid_main: PID 11 Started
waitpid_start_child: Started waitpid_main at PID=11
waitpid_start_child: Started waitpid_main at PID=12
waitpid_main: PID 12 Started
waitpid_start_child: Started waitpid_main at PID=13
waitpid_main: PID 13 Started
waitpid_test: Waiting for PID=11 with waitpid()
waitpid_main: PID 11 exitting with result=14
waitpid_test: PID 11 waitpid succeeded with stat_loc=0e00
waitpid_last: Waiting for PID=13 with waitpid()
waitpid_main: PID 12 exitting with result=14
waitpid_main: PID 13 exitting with result=14
waitpid_last: PASS: PID 13 waitpid succeeded with stat_loc=0e00

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 7 11
mxordblk 79cf878 79c7878
uordblks 94bc d66c
fordblks 79d73c0 79d3210

user_main: wqueue test
wqueue_test: HPWORK
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: HPWORK done
wqueue_test: test 1
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: test 1 done
wqueue_test: test 2
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: call = 100, expect = 100
wqueue_test: test 2 done
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 11 12
mxordblk 79c7878 https://github.com/apache/nuttx/commit/79c40a82de810dc49f0b60cb689ca95b47acaca3
uordblks d66c e08c
fordblks 79d3210 79d27f0

user_main: mutex test
Initializing mutex
Starting thread 1
Starting thread 2
Thread1 Thread2
Loops 32 32
Errors 0 0

Testing moved mutex
Starting moved mutex thread 1
Starting moved mutex thread 2
Thread1 Thread2
Moved Loops 32 32
Moved Errors 0 0

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 12 14
mxordblk https://github.com/apache/nuttx/commit/79c40a82de810dc49f0b60cb689ca95b47acaca3 79c2878
uordblks e08c f1a4
fordblks 79d27f0 79d16d8

user_main: timed mutex test
mutex_test: Initializing mutex
mutex_test: Starting thread
pthread: Started
pthread: Waiting for lock or timeout
mutex_test: Unlocking
pthread: Got the lock
pthread: Waiting for lock or timeout
pthread: Got the timeout. Terminating
mutex_test: PASSED

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 14 13
mxordblk 79c2878 79c4878
uordblks f1a4 e0c4
fordblks 79d16d8 79d27b8

user_main: cancel test
cancel_test: Test 1a: Normal Cancellation
cancel_test: Starting thread
start_thread: Initializing mutex
start_thread: Initializing cond
start_thread: Starting thread
start_thread: Yielding
sem_waiter: Taking mutex
sem_waiter: Starting wait for condition
cancel_test: Canceling thread
cancel_test: Joining
cancel_test: waiter exited with result=0xffffffff
cancel_test: PASS thread terminated with PTHREAD_CANCELED
cancel_test: Test 2: Asynchronous Cancellation
... Skipped
cancel_test: Test 3: Cancellation of detached thread
cancel_test: Re-starting thread
restart_thread: Destroying cond
restart_thread: Destroying mutex
restart_thread: Re-starting thread
start_thread: Initializing mutex
start_thread: Initializing cond
start_thread: Starting thread
start_thread: Yielding
sem_waiter: Taking mutex
sem_waiter: Starting wait for condition
cancel_test: Canceling thread
cancel_test: Joining
cancel_test: PASS pthread_join failed with status=ESRCH
cancel_test: Test 5: Non-cancelable threads
cancel_test: Re-starting thread (non-cancelable)
restart_thread: Destroying cond
restart_thread: Destroying mutex
restart_thread: Re-starting thread
start_thread: Initializing mutex
start_thread: Initializing cond
start_thread: Starting thread
start_thread: Yielding
sem_waiter: Taking mutex
sem_waiter: Starting wait for condition
sem_waiter: Setting non-cancelable
cancel_test: Canceling thread
cancel_test: Joining
sem_waiter: Releasing mutex
sem_waiter: Setting cancelable
cancel_test: waiter exited with result=0xffffffff
cancel_test: PASS thread terminated with PTHREAD_CANCELED
cancel_test: Test 6: Cancel message queue wait
cancel_test: Starting thread (cancelable)
Skipped
cancel_test: Test 7: Cancel signal wait
cancel_test: Starting thread (cancelable)
Skipped

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 13 6
mxordblk 79c4878 79cd878
uordblks e0c4 94cc
fordblks 79d27b8 79d73b0

user_main: robust test
robust_test: Initializing mutex
robust_test: Starting thread
robust_waiter: Taking mutex
robust_waiter: Exiting with mutex
robust_test: Take the lock again
robust_test: Make the mutex consistent again.
robust_test: Take the lock again
robust_test: Joining
robust_test: waiter exited with result=0
robust_test: Test complete with nerrors=0

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 6 6
mxordblk 79cd878 79cd878
uordblks 94cc 94cc
fordblks 79d73b0 79d73b0

user_main: semaphore test
sem_test: Initializing semaphore to 0
sem_test: Starting waiter thread 1
sem_test: Set thread 1 priority to 191
sem_test: Starting waiter thread 2
waiter_func: Thread 1 Started
sem_test: Set thread 2 priority to 128
waiter_func: Thread 1 initial semaphore value = 0
waiter_func: Thread 2 Started
waiter_func: Thread 1 waiting on semaphore
waiter_func: Thread 2 initial semaphore value = 0
waiter_func: Thread 2 waiting on semaphore
sem_test: Starting poster thread 3
sem_test: Set thread 3 priority to 64
poster_func: Thread 3 started
poster_func: Thread 3 semaphore value = -2
poster_func: Thread 3 posting semaphore
poster_func: Thread 3 new semaphore value = -1
waiter_func: Thread 1 awakened
poster_func: Thread 3 semaphore value = -1
waiter_func: Thread 1 new semaphore value = -1
poster_func: Thread 3 posting semaphore
waiter_func: Thread 1 done
waiter_func: Thread 2 awakened
poster_func: Thread 3 new semaphore value = 0
waiter_func: Thread 2 new semaphore value = 0
poster_func: Thread 3 done
waiter_func: Thread 2 done

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 6 8
mxordblk 79cd878 79cc878
uordblks 94cc 95ac
fordblks 79d73b0 79d72d0

user_main: timed semaphore test
semtimed_test: Initializing semaphore to 0
semtimed_test: Waiting for two second timeout
semtimed_test: PASS: first test returned timeout
BEFORE: (1682380868 sec, 171469312 nsec)
AFTER: (1682380870 sec, 172362256 nsec)
semtimed_test: Starting poster thread
semtimed_test: Set thread 1 priority to 191
semtimed_test: Starting poster thread 3
semtimed_test: Set thread 3 priority to 64
semtimed_test: Waiting for two second timeout
poster_func: Waiting for 1 second
poster_func: Posting
semtimed_test: PASS: sem_timedwait succeeded
BEFORE: (1682380870 sec, 175388544 nsec)
AFTER: (1682380871 sec, 177835792 nsec)

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 8 7
mxordblk 79cc878 79ce878
uordblks 95ac 95ac
fordblks 79d72d0 79d72d0

user_main: condition variable test
cond_test: Initializing mutex
cond_test: Initializing cond
cond_test: Starting waiter
cond_test: Set thread 1 priority to 128
waiter_thread: Started
cond_test: Starting signaler
cond_test: Set thread 2 priority to 64
thread_signaler: Started
thread_signaler: Terminating
cond_test: signaler terminated, now cancel the waiter
cond_test: Waiter Signaler
cond_test: Loops 32 32
cond_test: Errors 0 0
cond_test:
cond_test: 0 times, waiter did not have to wait for data
cond_test: 0 times, data was already available when the signaler run
cond_test: 0 times, the waiter was in an unexpected state when the signaler ran

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 7 7
mxordblk 79ce878 79ce878
uordblks 95ac 84cc
fordblks 79d72d0 79d83b0

user_main: pthread_exit() test
pthread_exit_test: Started pthread_exit_main at PID=299
pthread_exit_main 299: Starting pthread_exit_thread
pthread_exit_main 299: Sleeping for 5 seconds
pthread_exit_thread 300: Sleeping for 10 second
pthread_exit_thread 300: Still running...
pthread_exit_main 299: Calling pthread_exit()

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 7 7
mxordblk 79ce878 79cb878
uordblks 84cc a5ac
fordblks 79d83b0 79d62d0

user_main: pthread_rwlock test
pthread_rwlock: Initializing rwlock
pthread_exit_thread 300: Exiting

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 7 7
mxordblk 79cb878 79d0878
uordblks a5ac 84dc
fordblks 79d62d0 79d83a0

user_main: pthread_rwlock_cancel test
pthread_rwlock_cancel: Starting test

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 7 6
mxordblk 79d0878 79d0878
uordblks 84dc 73fc
fordblks 79d83a0 79d9480

user_main: timed wait test
thread_waiter: Initializing mutex
timedwait_test: Initializing cond
timedwait_test: Starting waiter
timedwait_test: Set thread 2 priority to 177
timedwait_test: Joining
thread_waiter: Taking mutex
thread_waiter: Starting 5 second wait for condition
thread_waiter: pthread_cond_timedwait timed out
thread_waiter: Releasing mutex
thread_waiter: Exit with status 0x12345678
timedwait_test: waiter exited with result=0x12345678

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 6 7
mxordblk 79d0878 79d0878
uordblks 73fc 84dc
fordblks 79d9480 79d83a0

user_main: timed message queue test
timedmqueue_test: Starting sender
timedmqueue_test: Waiting for sender to complete
sender_thread: Starting
sender_thread: mq_timedsend succeeded on msg 0
sender_thread: mq_timedsend succeeded on msg 1
sender_thread: mq_timedsend succeeded on msg 2
sender_thread: mq_timedsend succeeded on msg 3
sender_thread: mq_timedsend succeeded on msg 4
sender_thread: mq_timedsend succeeded on msg 5
sender_thread: mq_timedsend succeeded on msg 6
sender_thread: mq_timedsend succeeded on msg 7
sender_thread: mq_timedsend succeeded on msg 8
sender_thread: mq_timedsend 9 timed out as expected
sender_thread: returning nerrors=0
timedmqueue_test: Starting receiver
timedmqueue_test: Waiting for receiver to complete
receiver_thread: Starting
receiver_thread: mq_timedreceive succeed on msg 0
receiver_thread: mq_timedreceive succeed on msg 1
receiver_thread: mq_timedreceive succeed on msg 2
receiver_thread: mq_timedreceive succeed on msg 3
receiver_thread: mq_timedreceive succeed on msg 4
receiver_thread: mq_timedreceive succeed on msg 5
receiver_thread: mq_timedreceive succeed on msg 6
receiver_thread: mq_timedreceive succeed on msg 7
receiver_thread: mq_timedreceive succeed on msg 8
receiver_thread: Receive 9 timed out as expected
receiver_thread: returning nerrors=0
timedmqueue_test: Test complete

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 7 8
mxordblk 79d0878 79cd878
uordblks 84dc 9544
fordblks 79d83a0 79d7338

user_main: sigprocmask test
sigprocmask_test: SUCCESS

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 8 8
mxordblk 79cd878 79cd878
uordblks 9544 9544
fordblks 79d7338 79d7338

user_main: message queue test
mqueue_test: Starting receiver
mqueue_test: Set receiver priority to 128
mqueue_test: Starting sender
receiver_thread: Starting
mqueue_test: Set sender thread priority to 64
mqueue_test: Waiting for sender to complete
sender_thread: Starting
sender_thread: mq_send succeeded on msg 0
receiver_thread: mq_receive succeeded on msg 0
sender_thread: mq_send succeeded on msg 1
receiver_thread: mq_receive succeeded on msg 1
sender_thread: mq_send succeeded on msg 2
receiver_thread: mq_receive succeeded on msg 2
sender_thread: mq_send succeeded on msg 3
receiver_thread: mq_receive succeeded on msg 3
sender_thread: mq_send succeeded on msg 4
receiver_thread: mq_receive succeeded on msg 4
sender_thread: mq_send succeeded on msg 5
receiver_thread: mq_receive succeeded on msg 5
sender_thread: mq_send succeeded on msg 6
receiver_thread: mq_receive succeeded on msg 6
sender_thread: mq_send succeeded on msg 7
receiver_thread: mq_receive succeeded on msg 7
sender_thread: mq_send succeeded on msg 8
receiver_thread: mq_receive succeeded on msg 8
sender_thread: mq_send succeeded on msg 9
receiver_thread: mq_receive succeeded on msg 9
sender_thread: returning nerrors=0
mqueue_test: Killing receiver
receiver_thread: mq_receive interrupted!
receiver_thread: returning nerrors=0
mqueue_test: Canceling receiver
mqueue_test: receiver has already terminated

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 8 8
mxordblk 79cd878 79cd878
uordblks 9544 9544
fordblks 79d7338 79d7338

user_main: signal handler test
sighand_test: Initializing semaphore to 0
sighand_test: Starting waiter task
sighand_test: Started waiter_main pid=328
waiter_main: Waiter started
waiter_main: Unmasking signal 32
waiter_main: Registering signal handler
waiter_main: oact.sigaction=0 oact.sa_flags=0 oact.sa_mask=0000000000000000
waiter_main: Waiting on semaphore
sighand_test: Signaling pid=328 with signo=32 sigvalue=42
waiter_main: sem_wait() successfully interrupted by signal
waiter_main: done
sighand_test: done

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 8 8
mxordblk 79cd878 79c9878
uordblks 9544 955c
fordblks 79d7338 79d7320

user_main: nested signal handler test
signest_test: Starting signal waiter task at priority 101
signest_test: Started waiter_main pid=329
waiter_main: Waiter started
signest_test: Starting interfering task at priority 102
waiter_main: Setting signal mask
interfere_main: Waiting on semaphore
waiter_main: Registering signal handler
signest_test: Started interfere_main pid=330
waiter_main: Waiting on semaphore
signest_test: Simple case:
Total signalled 1240 Odd=620 Even=620
Total handled 1240 Odd=620 Even=620
Total nested 0 Odd=0 Even=0
signest_test: With task locking
Total signalled 2480 Odd=1240 Even=1240
Total handled 2480 Odd=1240 Even=1240
Total nested 0 Odd=0 Even=0
signest_test: With intefering thread
Total signalled 3720 Odd=1860 Even=1860
Total handled 3720 Odd=1860 Even=1860
Total nested 0 Odd=0 Even=0
signest_test: done

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 8 12
mxordblk 79c9878 79c1878
uordblks 955c d77c
fordblks 79d7320 79d3100

user_main: POSIX timer test
timer_test: Initializing semaphore to 0
timer_test: Unmasking signal 32
timer_test: Registering signal handler
timer_test: oact.sigaction=0 oact.sa_flags=0 oact.sa_mask=0000000000000000
timer_test: Creating timer
timer_test: Starting timer
timer_test: Waiting on semaphore
timer_expiration: Received signal 32
timer_expiration: sival_int=42
timer_expiration: si_code=2 (SI_TIMER)
timer_expiration: ucontext=0
timer_test: sem_wait() successfully interrupted by signal
timer_test: g_nsigreceived=1
timer_test: Waiting on semaphore
timer_expiration: Received signal 32
timer_expiration: sival_int=42
timer_expiration: si_code=2 (SI_TIMER)
timer_expiration: ucontext=0
timer_test: sem_wait() successfully interrupted by signal
timer_test: g_nsigreceived=2
timer_test: Waiting on semaphore
timer_expiration: Received signal 32
timer_expiration: sival_int=42
timer_expiration: si_code=2 (SI_TIMER)
timer_expiration: ucontext=0
timer_test: sem_wait() successfully interrupted by signal
timer_test: g_nsigreceived=3
timer_test: Waiting on semaphore
timer_expiration: Received signal 32
timer_expiration: sival_int=42
timer_expiration: si_code=2 (SI_TIMER)
timer_expiration: ucontext=0
timer_test: sem_wait() successfully interrupted by signal
timer_test: g_nsigreceived=4
timer_test: Waiting on semaphore
timer_expiration: Received signal 32
timer_expiration: sival_int=42
timer_expiration: si_code=2 (SI_TIMER)
timer_expiration: ucontext=0
timer_test: sem_wait() successfully interrupted by signal
timer_test: g_nsigreceived=5
timer_test: Deleting timer
timer_test: done

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 12 12
mxordblk 79c1878 79c1878
uordblks d77c d77c
fordblks 79d3100 79d3100

user_main: spinlock test
Start Lock test:
Thread num: 1, Loop times: 10000000

Test type: spinlock
spinlock: Test Results:
spinlock: Final counter: 10000000
spinlock: Average throughput : 5759977 op/s
spinlock: Total execution time: 1736787008 ns

Test type: rspinlock
rspinlock: Test Results:
rspinlock: Final counter: 10000000
rspinlock: Average throughput : 3473520 op/s
rspinlock: Total execution time: 2879306752 ns

Test type: seqcount
seqcount: Test Results:
seqcount: Final counter: 10000000
seqcount: Average throughput : 6538887 op/s
seqcount: Total execution time: 1529736096 ns

Start Lock test:
Thread num: 2, Loop times: 10000000

Test type: spinlock
spinlock: Test Results:
spinlock: Final counter: 20000000
spinlock: Average throughput : 2510364 op/s
spinlock: Total execution time: 3984563536 ns

Test type: rspinlock
rspinlock: Test Results:
rspinlock: Final counter: 20000000
rspinlock: Average throughput : 1585761 op/s
rspinlock: Total execution time: 6318388720 ns

Test type: seqcount
spinlock: Test Results:
spinlock: Final counter: 20000000
spinlock: Average throughput : 2510364 op/s
spinlock: Total execution time: 3984563536 ns

Test type: rspinlock
rspinlock: Test Results:
rspinlock: Final counter: 20000000
rspinlock: Average throughput : 1585761 op/s
rspinlock: Total execution time: 6318388720 ns

Test type: seqcount
seqcount: Test Results:
seqcount: Final counter: 20000000
seqcount: Average throughput : 2566609 op/s
seqcount: Total execution time: 3909949040 ns

Start Lock test:
Thread num: 3, Loop times: 10000000

Test type: spinlock
spinlock: Test Results:
spinlock: Final counter: 30000000
spinlock: Average throughput : 1187199 op/s
spinlock: Total execution time: 8543580880 ns

Test type: rspinlock
rspinlock: Test Results:
rspinlock: Final counter: 30000000
rspinlock: Average throughput : 1004611 op/s
rspinlock: Total execution time: 10816184224 ns

Test type: seqcount
seqcount: Test Results:
seqcount: Final counter: 30000000
seqcount: Average throughput : 1455844 op/s
seqcount: Total execution time: 7069242096 ns

Start Lock test:
Thread num: 4, Loop times: 10000000

Test type: spinlock
spinlock: Test Results:
spinlock: Final counter: 40000000
spinlock: Average throughput : 779557 op/s
spinlock: Total execution time: 13309599952 ns

Test type: rspinlock
rspinlock: Test Results:
rspinlock: Final counter: 40000000
rspinlock: Average throughput : 643309 op/s
rspinlock: Total execution time: 16806949776 ns

Test type: seqcount
seqcount: Test Results:
seqcount: Final counter: 40000000
seqcount: Average throughput : 1042020 op/s
seqcount: Total execution time: 9982159344 ns

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 12 11
mxordblk 79c1878 79cc878
uordblks d77c a77c
fordblks 79d3100 79d6100

user_main: wdog test
wdog_test start...
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 0 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 1 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 10 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 100 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 1000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 10000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 100000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wdtest_once 1000000 ns
wd_start with maximum delay, cancel OK, rest 1073741820
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741819
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741818
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741817
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741815
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741815
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741814
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741813
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741812
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741812
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741811
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741810
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741809
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741809
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741808
wdtest_recursive 1000000ns
wd_start with maximum delay, cancel OK, rest 1073741806
wdtest_recursive 1000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 51 times, elapsed tick 102
wdtest_recursive 10000000ns
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
recursive wdog triggered 9 times, elapsed tick 99
wdog_test end...

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 11 14
mxordblk 79cc878 79b6878
uordblks a77c b89c
fordblks 79d6100 79d4fe0

user_main: round-robin scheduler test
rr_test: Set thread priority to 1
rr_test: Set thread policy to SCHED_RR
rr_test: Starting first get_primes_thread
First get_primes_thread: 425
rr_test: Starting second get_primes_thread
Second get_primes_thread: 426
rr_test: Waiting for threads to complete -- this should take awhile
If RR scheduling is working, they should start and complete at
about the same time
get_primes_thread id=1 started, looking for primes < 30000, doing 10 run(s)
get_primes_thread id=2 started, looking for primes < 30000, doing 10 run(s)
get_primes_thread id=1 finished, found 3246 primes, last one was 29989
get_primes_thread id=2 finished, found 3246 primes, last one was 29989
rr_test: Done

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 14 12
mxordblk 79b6878 https://github.com/apache/nuttx/commit/79ca8783189d1c25f29c4907edae1e103a21c464
uordblks b89c b89c
fordblks 79d4fe0 79d4fe0

user_main: barrier test
barrier_test: Initializing barrier
barrier_test: Thread 0 created
barrier_test: Thread 1 created
barrier_test: Thread 2 created
barrier_test: Thread 3 created
barrier_test: Thread 4 created
barrier_test: Thread 5 created
barrier_test: Thread 6 created
barrier_test: Thread 7 created
barrier_func: Thread 0 started
barrier_func: Thread 1 started
barrier_func: Thread 2 started
barrier_func: Thread 3 started
barrier_func: Thread 4 started
barrier_func: Thread 5 started
barrier_func: Thread 6 started
barrier_func: Thread 7 started
barrier_func: Thread 0 calling pthread_barrier_wait()
barrier_func: Thread 1 calling pthread_barrier_wait()
barrier_func: Thread 2 calling pthread_barrier_wait()
barrier_func: Thread 3 calling pthread_barrier_wait()
barrier_func: Thread 4 calling pthread_barrier_wait()
barrier_func: Thread 5 calling pthread_barrier_wait()
barrier_func: Thread 6 calling pthread_barrier_wait()
barrier_func: Thread 7 calling pthread_barrier_wait()
barrier_func: Thread 7, back with status=PTHREAD_BARRIER_SERIAL_THREAD (I AM SPECIAL)
barrier_func: Thread 0, back with status=0 (I am not special)
barrier_func: Thread 1, back with status=0 (I am not special)
barrier_func: Thread 2, back with status=0 (I am not special)
barrier_func: Thread 3, back with status=0 (I am not special)
barrier_func: Thread 4, back with status=0 (I am not special)
barrier_func: Thread 5, back with status=0 (I am not special)
barrier_func: Thread 6, back with status=0 (I am not special)
barrier_func: Thread 7 done
barrier_func: Thread 0 done
barrier_test: Thread 0 completed with result=0
barrier_func: Thread 1 done
barrier_func: Thread 2 done
barrier_test: Thread 1 completed with result=0
barrier_test: Thread 2 completed with result=0
barrier_func: Thread 3 done
barrier_func: Thread 4 done
barrier_func: Thread 5 done
barrier_test: Thread 3 completed with result=0
barrier_test: Thread 4 completed with result=0
barrier_test: Thread 5 completed with result=0
barrier_func: Thread 6 done
barrier_test: Thread 6 completed with result=0
barrier_test: Thread 7 completed with result=0

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 12 14
mxordblk https://github.com/apache/nuttx/commit/79ca8783189d1c25f29c4907edae1e103a21c464 79c0878
uordblks b89c b89c
fordblks 79d4fe0 79d4fe0

user_main: scheduler lock test
sched_lock: Starting lowpri_thread at 97
sched_lock: Set lowpri_thread priority to 97
sched_lock: Starting highpri_thread at 98
sched_lock: Set highpri_thread priority to 98
sched_lock: Waiting...
sched_lock: PASSED No pre-emption occurred while scheduler was locked.
sched_lock: Starting lowpri_thread at 97
sched_lock: Set lowpri_thread priority to 97
sched_lock: Starting highpri_thread at 98
sched_lock: Set highpri_thread priority to 98
sched_lock: Waiting...
sched_lock: PASSED No pre-emption occurred while scheduler was locked.
sched_lock: Finished

End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 14 12
mxordblk 79c0878 https://github.com/apache/nuttx/commit/79ca8783189d1c25f29c4907edae1e103a21c464
uordblks b89c a7bc
fordblks 79d4fe0 79d60c0

user_main: vfork() test
vfork_test: Child 439 ran successfully

user_main: smp call test
smp_call_test: Test start
smp_call_test: Call cpu 0, nowait
smp_call_test: Call cpu 0, wait
smp_call_test: Call cpu 1, nowait
smp_call_test: Call cpu 1, wait
smp_call_test: Call cpu 2, nowait
smp_call_test: Call cpu 2, wait
smp_call_test: Call cpu 3, nowait
smp_call_test: Call cpu 3, wait
smp_call_test: Call multi cpu, nowait
smp_call_test: Call in interrupt, wait
smp_call_test: Call multi cpu, wait
smp_call_test: Test success

Final memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 79e087c 79e087c
ordblks 4 11
mxordblk 79d7878 79cb878
uordblks 636c b7bc
fordblks 79da510 79d50c0
user_main: Exiting
ostest_main: Exiting with status 0

Replace critical_section with spinlock or mutex. The benefits of doing this are: 1. It makes the code logic clearer, with different resources protected by different locks. 2. It improves system responsiveness and avoids contention issues caused by acquiring the same large lock. Signed-off-by: wangzhi16 <wangzhi16@xiaomi.com>

The benefits of doing this are: 1. It makes the code logic clearer, with different resources protected by different locks. 2. It improves system responsiveness and avoids contention issues caused by acquiring the same large lock. Signed-off-by: wangzhi16 <wangzhi16@xiaomi.com>

Replace critical_section with spinlock. The benefits of doing this are: 1. It makes the code logic clearer, with different resources protected by different locks. 2. It improves system responsiveness and avoids contention issues caused by acquiring the same large lock. Signed-off-by: wangzhi16 <wangzhi16@xiaomi.com>

The benefits of doing this are: 1. It makes the code logic clearer, with different resources protected by different locks. 2. It improves system responsiveness and avoids contention issues caused by acquiring the same large lock. Signed-off-by: wangzhi16 <wangzhi16@xiaomi.com>

To skip the style issue: Error: /home/runner/work/nuttx/nuttx/nuttx/arch/arm/src/phy62xx/irq.c:194:5: error: Mixed case identifier found Error: /home/runner/work/nuttx/nuttx/nuttx/arch/arm/src/phy62xx/irq.c:196:5: error: Mixed case identifier found Error: /home/runner/work/nuttx/nuttx/nuttx/arch/arm/src/phy62xx/irq.c:199:5: error: Mixed case identifier found Error: /home/runner/work/nuttx/nuttx/nuttx/arch/arm/src/phy62xx/phyplus_wdt.c:61:28: error: Mixed case identifier found Error: /home/runner/work/nuttx/nuttx/nuttx/arch/arm/src/phy62xx/phyplus_wdt.c:104:2: error: Mixed case identifier found Error: /home/runner/work/nuttx/nuttx/nuttx/arch/arm/src/phy62xx/phyplus_wdt.c:162:50: error: Mixed case identifier found Signed-off-by: wangzhi16 <wangzhi16@xiaomi.com>

wangzhi16 added 3 commits January 30, 2026 14:06

wangzhi16 requested review from anchao, hartmannathan, jerpelea, pkarashchenko, pussuw and xiaoxiang781216 as code owners January 30, 2026 06:18

github-actions Bot added Arch: arm Issues related to ARM (32-bit) architecture Arch: arm64 Issues related to ARM64 (64-bit) architecture Size: M The size of the change in this PR is medium labels Jan 30, 2026

github-actions Bot added the Arch: xtensa Issues related to the Xtensa architecture label Jan 30, 2026

xiaoxiang781216 previously approved these changes Jan 30, 2026

View reviewed changes

wangzhi16 dismissed xiaoxiang781216’s stale review via 48cf7de February 2, 2026 03:39

wangzhi16 requested review from davids5 and johannes-nivus as code owners February 2, 2026 03:39

github-actions Bot added Area: Tooling labels Feb 2, 2026

wangzhi16 force-pushed the critical_section branch from 48cf7de to 6e81d5a Compare February 2, 2026 03:42

Donny9 approved these changes Feb 2, 2026

View reviewed changes

Donny9 requested a review from xiaoxiang781216 February 2, 2026 05:25

xiaoxiang781216 approved these changes Feb 2, 2026

View reviewed changes

xiaoxiang781216 merged commit a06ac14 into apache:master Feb 2, 2026
40 checks passed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

sched/spinlock: Replace critical_section with spinlock.#18270

sched/spinlock: Replace critical_section with spinlock.#18270
xiaoxiang781216 merged 5 commits intoapache:masterfrom
wangzhi16:critical_section

wangzhi16 commented Jan 30, 2026 •

edited

Loading

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

3 participants

Conversation

wangzhi16 commented Jan 30, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Summary

Included Commits

Rationale

Impact

Testing

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

3 participants

wangzhi16 commented Jan 30, 2026 •

edited

Loading