Whats New Pages 5.12

cura/resources/texts/whats_new/0.html

@@ -1,2 +1,2 @@
-<h4>Multi-material painting</h4>
-<p> You can now make a multi-color or multi-material print, just by painting on your model! Select the proper extruder and drag the cursor over the model. You can also set how deep the painted features will go into the model, for a faster print or a stronger interlocking of materials, with the settings "Multi-material Depth" and "Multi-material Precision" <a href="https://www.thingiverse.com/thing:7160681?utm_source=whatsnew&utm_medium=cura&utm_campaign=511">Visit our Thingiverse page to download this painting easel try it for yourself</a> </p>
+<h4>Improved printed part quality for newest UltiMaker Printers</h4>
+<p>We’ve updated our print settings for the UltiMaker S-series to ensure your parts aren't just high-quality, but also high-performance. These updates deliver higher-quality prints at faster speeds, whether for prototyping or production. Visit our website if you want to learn <a href="https://ultimaker.com/3d-printers/s-series/?utm_source=whatsnew&utm_medium=cura&utm_campaign=512">which of our S Series 3D printers is right for you</a></p>

cura/resources/texts/whats_new/1.html

@@ -1,2 +1,2 @@
-<h4>Seam customization with painting</h4>
-<p> You can also use the painting feature to select areas of the model where you want the seam to be preferably placed, or avoided. This way, you can easily ensure that your model prints as nice as possible. </p>
+<h4>Smarter Multi-Extruder UI</h4>
+<p>Fewer mistakes, less wasted time. Settings for disabled extruders are now greyed out to prevent "ghost editing," where you might spend time fine-tuning the Printing Temperature or Retraction Distance for Extruder 2, only to realize later that the entire model was set to print with Extruder 1. Additionally, a warning appears in the Preview stage if your model is hidden because an extruder is unchecked.</p>

cura/resources/texts/whats_new/2.html

@@ -1,2 +1,2 @@
-<h4>Quality improvements for S6/S8</h4>
-<p> We expanded the available print cores on the UltiMaker S6 and S8, so you can now also slice for AA 0.25, AA 0.4, AA 0.8, CC 0.4 and CC 0.6. New draft intent profiles for PLA, Tough PLA, ABS, and PETG have been added and significantly improved printed part quality for PLA, Tough PLA, ABS, and PETG. Visit our website if you want to learn <a href="https://ultimaker.com/3d-printers/s-series/?utm_source=whatsnew&utm_medium=cura&utm_campaign=511">which of our S Series 3D printers is right for you</a>.</p>
+<h4>Improved Bridging behavior</h4>
+<p> Bridging behavior over rectangular empty spaces and infill are now placed in a smarter way. The bridge lines are now anchored to layers below where possible. Bridge lines can now also be interlaced for improved quality.</p>

cura/resources/texts/whats_new/3.html

@@ -1,2 +1,2 @@
-<h4>Do not use USB-connection by default</h4>
-<p> In the last few years, we had many reports that Cura was messing up with USB devices, or getting very slow because it tries to find a USB-connected printer. In version 5.10, we added a hidden preference to log the actual use of a USB printer, and starting with 5.11, this feature will be disabled by default, unless you used it with 5.10. </p>
+<h4>New Infill settings</h4>
+<p>New Honeycomb and Octagon infill types ensure the toolpath never crosses its own path on the same layer, reducing the chance of the nozzle hitting the infill during printing. Infill Start/End Move settings move the infill starts away from the wall to prevent surface blobs from a nozzle traveling to start a new infill line. </p>