PHYoIP Server

Important

Work in progress! "Usage:" and "Examples:" are more like a specification atm.

If a serial port is specified, the server acts as a gateway server (= server with integrated gateway client).

Usage:

phyoip-server [PORT [SPCFG DEV BAUD [CONFIG]]]
phyoip-server --help

Examples:

phyoip-server # using the default port
phyoip-server 1234
phyoip-server 1234 A,0D0A /dev/ttyS4 115200
phyoip-server 0 B,1500 COM7 19200 # using the default port
phyoip-server 1234 A,0A,24 COM3 9600 8E2

Serial Protocol Config (SPCFG)

Comma separated list of parameters. The first parameter specifies the protocol type.

A ASCII Protocol

ASCII protocols use one or two stop symbols, and optionally one start symbol: A,STOP[,START]. Only the stop symbol may have two characters. The start symbol can not be NULL.

Symbol	Description
xx, xxxx	x has to be a hexadecimal digit
LF	Line Feed, 0Ah, 10d
CR	Carriage Return, 0Dh, 13d
CRLF	CR and LF, 0D0Ah
NULL	Null terminator, 00h, 0d

B Binary Protocol

B,TO[,LEN]

• TO timout as microseconds
• LEN byte offset of the length specifier of the message