Porting heads to Galago Pro 5, built ROM fails to boot

[loftlifter31]

Context of the Build

1. What board are you trying to build?
Trying to port heads to a new board, the system76 galp5 which is already supported by coreboot.

2. What repository:branch are you using to build from?

• [ X] Heads:Master
• Other (please specify)

3. What version of coreboot are you trying to build
4.22.01

4. In building the rom where did you get the blobs?

• No blobs required
• Provided by the company that installed Heads on the device
• Extracted from a backup rom taken from this device
• Extracted from another backup rom taken from another device (please identify the board model)
• Extracted from the online bios using the automated tools provided in Heads
• I don't know
• Provided by system board manufacturer

5. If using the automated tools to get the blobs did you run the relevant scripts in the blobs directory

• Yes
• No

6. What operating system are you using

Debian 11

Please describe the problem

No errors during build process, but boots into black screen. Unsure what steps to take to troubleshoot at this point.

To Reproduce
Steps to reproduce the behavior:

1. Build rom
2. flash using hardware programmer
3. reboot
   Expected behavior
   Boot to Heads first time boot screen

Screenshots
If applicable, add screenshots to help explain your problem.

Additional context
Add any other context about the problem here.
heads_build.log

[loftlifter31]

Coreboot config files I am using come from manufacturer
coreboot-galp5.config.txt
galp5.config.txt
linux-galp5.config.txt

[tlaurion]

@loftlifter31 where can I see a branch you work on?

[loftlifter31]

Work on? I'm building from master if that's your question.

[tlaurion]

Work on? I'm building from master if that's your question.

Where can I see your code as a branch?
Ideally do a WiP pull request on master, so that I can comment in code, just like all other community ports before se we can iterate on top. Board config, Linux config coreboot config that I will be able to review comparing other boards of same or similar family, nothing what is HCL, iGPU, dGPU and other things that could prevent booting or have console output

[loftlifter31]

I added pull request #1766 with all the config files.

[tlaurion]

@loftlifter31 ping

[loftlifter31]

I got it working. Just needed to update vbt.

[tlaurion]

I got it working. Just needed to update vbt.

Commented system76/firmware-open#575 which I guess is the issue you aimed to close, not this one.

To close this issue, #1774 is supposed to boot and work for others and yourself.

[loftlifter31]

This is the one I wanted to close. The issue was heads was not booting. Replacing the vbt solved the problem.

[tlaurion]

Where can we see a working branch booting galp5 @loftlifter31 ?
master...loftlifter31:heads:master doesn't contain chainges making galp5 bootable AFAIK?