Merge pull request #3996 from TheBlueMatt/2025-08-faster-0.1-load

Add a method to avoid re-persisting monitors during startup

Author: TheBlueMatt

lightning/src/chain/chainmonitor.rs

@@ -903,6 +903,53 @@ where
 
 		self.pending_send_only_events.lock().unwrap().push(send_peer_storage_event)
 	}
+
+	/// Loads a [`ChannelMonitor`] which already exists on disk after startup.
+	///
+	/// Using this over [`chain::Watch::watch_channel`] avoids re-persisting a [`ChannelMonitor`]
+	/// that hasn't changed, slowing down startup.
+	///
+	/// Note that this method *can* be used if additional blocks were replayed against the
+	/// [`ChannelMonitor`] or if a [`ChannelMonitorUpdate`] loaded from disk was replayed such that
+	/// it will replayed on startup, and in general can only *not* be used if you directly accessed
+	/// the [`ChannelMonitor`] and changed its state in some way that will not be replayed again on
+	/// a restart. Such direct access should generally never occur for most LDK-based nodes.
+	///
+	/// For [`ChannelMonitor`]s which were last serialized by an LDK version prior to 0.1 this will
+	/// fall back to calling [`chain::Watch::watch_channel`] and persisting the [`ChannelMonitor`].
+	/// See the release notes for LDK 0.1 for more information on this requirement.
+	///
+	/// [`ChannelMonitor`]s which do not need to be persisted (i.e. were last written by LDK 0.1 or
+	/// later) will be loaded without persistence and this method will return
+	/// [`ChannelMonitorUpdateStatus::Completed`].
+	pub fn load_existing_monitor(
+		&self, channel_id: ChannelId, monitor: ChannelMonitor<ChannelSigner>,
+	) -> Result<ChannelMonitorUpdateStatus, ()> {
+		if !monitor.written_by_0_1_or_later() {
+			return chain::Watch::watch_channel(self, channel_id, monitor);
+		}
+
+		let logger = WithChannelMonitor::from(&self.logger, &monitor, None);
+		let mut monitors = self.monitors.write().unwrap();
+		let entry = match monitors.entry(channel_id) {
+			hash_map::Entry::Occupied(_) => {
+				log_error!(logger, "Failed to add new channel data: channel monitor for given channel ID is already present");
+				return Err(());
+			},
+			hash_map::Entry::Vacant(e) => e,
+		};
+		log_trace!(
+			logger,
+			"Loaded existing ChannelMonitor for channel {}",
+			log_funding_info!(monitor)
+		);
+		if let Some(ref chain_source) = self.chain_source {
+			monitor.load_outputs_to_watch(chain_source, &self.logger);
+		}
+		entry.insert(MonitorHolder { monitor, pending_monitor_updates: Mutex::new(Vec::new()) });
+
+		Ok(ChannelMonitorUpdateStatus::Completed)
+	}
 }
 
 impl<

lightning/src/chain/channelmonitor.rs

@@ -1305,6 +1305,11 @@ pub(crate) struct ChannelMonitorImpl<Signer: EcdsaChannelSigner> {
 	// found at `Self::funding`. We don't use the term "renegotiated", as the currently locked
 	// `FundingScope` could be one that was renegotiated.
 	alternative_funding_confirmed: Option<(Txid, u32)>,
+
+	/// [`ChannelMonitor`]s written by LDK prior to 0.1 need to be re-persisted after startup. To
+	/// make deciding whether to do so simple, here we track whether this monitor was last written
+	/// prior to 0.1.
+	written_by_0_1_or_later: bool,
 }
 
 // Returns a `&FundingScope` for the one we are currently observing/handling commitment transactions
@@ -1887,6 +1892,8 @@ impl<Signer: EcdsaChannelSigner> ChannelMonitor<Signer> {
 			prev_holder_htlc_data: None,
 
 			alternative_funding_confirmed: None,
+
+			written_by_0_1_or_later: true,
 		})
 	}
 
@@ -2020,6 +2027,10 @@ impl<Signer: EcdsaChannelSigner> ChannelMonitor<Signer> {
 		self.inner.lock().unwrap().get_funding_txo()
 	}
 
+	pub(crate) fn written_by_0_1_or_later(&self) -> bool {
+		self.inner.lock().unwrap().written_by_0_1_or_later
+	}
+
 	/// Gets the funding script of the channel this ChannelMonitor is monitoring for.
 	pub fn get_funding_script(&self) -> ScriptBuf {
 		self.inner.lock().unwrap().get_funding_script()
@@ -6372,6 +6383,9 @@ impl<'a, 'b, ES: EntropySource, SP: SignerProvider> ReadableArgs<(&'a ES, &'b SP
 			(32, pending_funding, optional_vec),
 			(34, alternative_funding_confirmed, option),
 		});
+		// Note that `payment_preimages_with_info` was added (and is always written) in LDK 0.1, so
+		// we can use it to determine if this monitor was last written by LDK 0.1 or later.
+		let written_by_0_1_or_later = payment_preimages_with_info.is_some();
 		if let Some(payment_preimages_with_info) = payment_preimages_with_info {
 			if payment_preimages_with_info.len() != payment_preimages.len() {
 				return Err(DecodeError::InvalidValue);
@@ -6542,6 +6556,8 @@ impl<'a, 'b, ES: EntropySource, SP: SignerProvider> ReadableArgs<(&'a ES, &'b SP
 			prev_holder_htlc_data,
 
 			alternative_funding_confirmed,
+
+			written_by_0_1_or_later,
 		})))
 	}
 }

lightning/src/ln/channelmanager.rs

@@ -15583,9 +15583,13 @@ impl Readable for VecDeque<(Event, Option<EventCompletionAction>)> {
 ///    This is important if you have replayed a nontrivial number of blocks in step (4), allowing
 ///    you to avoid having to replay the same blocks if you shut down quickly after startup. It is
 ///    otherwise not required.
+///
 ///    Note that if you're using a [`ChainMonitor`] for your [`chain::Watch`] implementation, you
 ///    will likely accomplish this as a side-effect of calling [`chain::Watch::watch_channel`] in
 ///    the next step.
+///
+///    If you wish to avoid this for performance reasons, use
+///    [`ChainMonitor::load_existing_monitor`].
 /// 7) Move the [`ChannelMonitor`]s into your local [`chain::Watch`]. If you're using a
 ///    [`ChainMonitor`], this is done by calling [`chain::Watch::watch_channel`].
 ///
@@ -15600,6 +15604,7 @@ impl Readable for VecDeque<(Event, Option<EventCompletionAction>)> {
 /// which you've already broadcasted the transaction.
 ///
 /// [`ChainMonitor`]: crate::chain::chainmonitor::ChainMonitor
+/// [`ChainMonitor::load_existing_monitor`]: crate::chain::chainmonitor::ChainMonitor::load_existing_monitor
 pub struct ChannelManagerReadArgs<
 	'a,
 	M: Deref,

lightning/src/ln/functional_test_utils.rs

@@ -1323,8 +1323,8 @@ pub fn _reload_node<'a, 'b, 'c>(
 	for monitor in monitors_read.drain(..) {
 		let channel_id = monitor.channel_id();
 		assert_eq!(
-			node.chain_monitor.watch_channel(channel_id, monitor),
-			Ok(ChannelMonitorUpdateStatus::Completed)
+			node.chain_monitor.load_existing_monitor(channel_id, monitor),
+			Ok(ChannelMonitorUpdateStatus::Completed),
 		);
 		check_added_monitors!(node, 1);
 	}

lightning/src/util/test_utils.rs

@@ -515,6 +515,35 @@ impl<'a> TestChainMonitor<'a> {
 			self.latest_monitor_update_id.lock().unwrap().get(channel_id).unwrap().clone();
 		self.chain_monitor.channel_monitor_updated(*channel_id, latest_update).unwrap();
 	}
+
+	pub fn load_existing_monitor(
+		&self, channel_id: ChannelId, monitor: ChannelMonitor<TestChannelSigner>,
+	) -> Result<chain::ChannelMonitorUpdateStatus, ()> {
+		#[cfg(feature = "std")]
+		if let Some(blocker) = &*self.write_blocker.lock().unwrap() {
+			blocker.recv().unwrap();
+		}
+
+		// At every point where we get a monitor update, we should be able to send a useful monitor
+		// to a watchtower and disk...
+		let mut w = TestVecWriter(Vec::new());
+		monitor.write(&mut w).unwrap();
+		let new_monitor = <(BlockHash, ChannelMonitor<TestChannelSigner>)>::read(
+			&mut io::Cursor::new(&w.0),
+			(self.keys_manager, self.keys_manager),
+		)
+		.unwrap()
+		.1;
+		// Note that a ChannelMonitor might not round-trip exactly here as we have tests that were
+		// serialized prior to LDK 0.1 and re-serializing them will flip the "written after LDK
+		// 0.1" flag.
+		self.latest_monitor_update_id
+			.lock()
+			.unwrap()
+			.insert(channel_id, (monitor.get_latest_update_id(), monitor.get_latest_update_id()));
+		self.added_monitors.lock().unwrap().push((channel_id, monitor));
+		self.chain_monitor.load_existing_monitor(channel_id, new_monitor)
+	}
 }
 impl<'a> chain::Watch<TestChannelSigner> for TestChainMonitor<'a> {
 	fn watch_channel(