added an additional parition for provisioning in QSPIFormat sketch

Author: andreagilardoni

libraries/STM32H747_System/examples/QSPIFormat/QSPIFormat.ino

@@ -11,7 +11,8 @@
 QSPIFBlockDevice root(QSPI_SO0, QSPI_SO1, QSPI_SO2, QSPI_SO3,  QSPI_SCK, QSPI_CS, QSPIF_POLARITY_MODE_1, 40000000);
 mbed::MBRBlockDevice wifi_data(&root, 1);
 mbed::MBRBlockDevice ota_data(&root, 2);
-mbed::MBRBlockDevice user_data(&root, 3);
+mbed::MBRBlockDevice kvstore_data(&root, 3);
+mbed::MBRBlockDevice user_data(&root, 4);
 mbed::FATFileSystem wifi_data_fs("wlan");
 mbed::FATFileSystem ota_data_fs("fs");
 mbed::FileSystem * user_data_fs;
@@ -47,11 +48,13 @@ void setup() {
   Serial.println("Available partition schemes:");
   Serial.println("\nPartition scheme 1");
   Serial.println("Partition 1: WiFi firmware and certificates 1MB");
-  Serial.println("Partition 2: OTA and user data 13MB");
+  Serial.println("Partition 2: OTA and user data 12MB");
+  Serial.println("Partition 3: Provisioning KVStore 1MB");
   Serial.println("\nPartition scheme 2");
   Serial.println("Partition 1: WiFi firmware and certificates 1MB");
   Serial.println("Partition 2: OTA 5MB");
-  Serial.println("Partition 3: User data 8MB"),
+  Serial.println("Partition 3: Provisioning KVStore 1MB");
+  Serial.println("Partition 4: User data 7MB"),
   Serial.println("\nDo you want to use partition scheme 1? Y/[n]");
   Serial.println("If No, partition scheme 2 will be used.");
   bool default_scheme = waitResponse();
@@ -69,12 +72,14 @@ void setup() {
 
     mbed::MBRBlockDevice::partition(&root, 1, 0x0B, 0, 1024 * 1024);
     if(default_scheme) {
-      mbed::MBRBlockDevice::partition(&root, 3, 0x0B, 14 * 1024 * 1024, 14 * 1024 * 1024);
-      mbed::MBRBlockDevice::partition(&root, 2, 0x0B, 1024 * 1024, 14 * 1024 * 1024);
+      mbed::MBRBlockDevice::partition(&root, 2, 0x0B, 1024 * 1024, 13 * 1024 * 1024);
+      mbed::MBRBlockDevice::partition(&root, 3, 0x0B, 13 * 1024 * 1024, 14 * 1024 * 1024);
+      mbed::MBRBlockDevice::partition(&root, 4, 0x0B, 14 * 1024 * 1024, 14 * 1024 * 1024);
       // use space from 15.5MB to 16 MB for another fw, memory mapped
     } else {
       mbed::MBRBlockDevice::partition(&root, 2, 0x0B, 1024 * 1024, 6 * 1024 * 1024);
-      mbed::MBRBlockDevice::partition(&root, 3, 0x0B, 6 * 1024 * 1024, 14 * 1024 * 1024);
+      mbed::MBRBlockDevice::partition(&root, 3, 0x0B, 6* 1024 * 1024, 7 * 1024 * 1024);
+      mbed::MBRBlockDevice::partition(&root, 4, 0x0B, 7 * 1024 * 1024, 14 * 1024 * 1024);
       // use space from 15.5MB to 16 MB for another fw, memory mapped
     }
 
@@ -83,7 +88,7 @@ void setup() {
       Serial.println("Error formatting WiFi partition");
       return;
     }
-  
+
     err = ota_data_fs.reformat(&ota_data);
     if (err) {
       Serial.println("Error formatting OTA partition");