Use alio2-cr1-flp199-ib:8083 as DCS-CCDB server, define in setenv.sh

Author: shahor02

DATA/common/setenv.sh

@@ -110,6 +110,8 @@ if [[ -z "${IS_TRIGGERED_DATA:-}" ]]; then export IS_TRIGGERED_DATA=0; fi
 if [[ -z "${CTF_DIR:-}" ]];           then CTF_DIR=$FILEWORKDIR; fi             # Directory where to store CTFs
 if [[ -z "${CALIB_DIR:-}" ]];         then CALIB_DIR="/dev/null"; fi            # Directory where to store output from calibration workflows, /dev/null : skip their writing
 if [[ -z "${EPN2EOS_METAFILES_DIR:-}" ]]; then EPN2EOS_METAFILES_DIR="/dev/null"; fi # Directory where to store epn2eos files metada, /dev/null : skip their writing
+if [[ -z "${DCSCCDBSERVER:-}" ]];  then export DCSCCDBSERVER="http://alio2-cr1-flp199-ib:8083"; fi # server for transvering calibration data to DCS
+
 if [[ $EPNSYNCMODE == 0 ]]; then
   if [[ -z "${SHMSIZE:-}" ]];       then export SHMSIZE=$(( 8 << 30 )); fi    # Size of shared memory for messages
   if [[ -z "${NGPUS:-}" ]];         then export NGPUS=1; fi                   # Number of GPUs to use, data distributed round-robin

DATA/production/calib/hmp-pedestals-processing.sh

@@ -57,7 +57,7 @@ fi
 SPEC_PARAM=""
 if [ $HMP_NODCSCCDB_REC == 'false' ];
 then
-  SPEC_PARAM+="--use-dcsccdb --dcsccdb-uri 'http://alio2-cr1-flp199.cern.ch:8083' --dcsccdb-alivehours 3 "
+  SPEC_PARAM+="--use-dcsccdb --dcsccdb-uri $DCSCCDBSERVER --dcsccdb-alivehours 3 "
 fi
 if [ $HMP_CCDB_REC == 'true' ];
 then

DATA/production/calib/its-noise-aggregator.sh

@@ -17,7 +17,7 @@ fi
 if [[ -z $NTHREADS ]] ; then NTHREADS=1; fi
 
 CCDBPATH1="http://o2-ccdb.internal"
-CCDBPATH2="http://alio2-cr1-flp199.cern.ch:8083"
+CCDBPATH2="$DCSCCDBSERVER"
 if [[ $RUNTYPE == "SYNTHETIC" || "${GEN_TOPO_DEPLOYMENT_TYPE:-}" == "ALICE_STAGING" || ! -z $ISTEST ]]; then
   CCDBPATH1="http://ccdb-test.cern.ch:8080"
   CCDBPATH2="http://ccdb-test.cern.ch:8080"

DATA/production/calib/its-threshold-aggregator.sh

@@ -11,7 +11,7 @@ PROXY_INSPEC="tunestring:ITS/TSTR;runtype:ITS/RUNT;fittype:ITS/FITT;scantype:ITS
 CCDBPATH1=""
 CCDBPATH2=""
 if [ $RUNTYPE_ITS == "tuning" ] || [ $RUNTYPE_ITS == "digital" ] || [ $RUNTYPE_ITS == "tuningbb" ]; then
-  CCDBPATH1="http://alio2-cr1-flp199.cern.ch:8083"
+  CCDBPATH1="$DCSCCDBSERVER"
   CCDBPATH2="http://o2-ccdb.internal"
 else 
   CCDBPATH1="http://o2-ccdb.internal"

DATA/production/calib/mch-badchannel-aggregator.sh

@@ -20,7 +20,7 @@ BADCHANNEL_CONFIG="${ARGS_ALL_CONFIG};MCHBadChannelCalibratorParam.maxPed=${MCH_
 WORKFLOW="o2-dpl-raw-proxy $ARGS_ALL --proxy-name mch-badchannel-input-proxy --dataspec \"$PROXY_INSPEC\" --network-interface ib0 --channel-config \"name=mch-badchannel-input-proxy,method=bind,type=pull,rateLogging=0,transport=zeromq\" | "
 WORKFLOW+="o2-calibration-mch-badchannel-calib-workflow $ARGS_ALL --configKeyValues \"$BADCHANNEL_CONFIG\" | "
 WORKFLOW+="o2-calibration-ccdb-populator-workflow $ARGS_ALL --configKeyValues \"$ARGS_ALL_CONFIG\" --ccdb-path=\"http://o2-ccdb.internal\" --sspec-min 0 --sspec-max 0 | "
-WORKFLOW+="o2-calibration-ccdb-populator-workflow $ARGS_ALL --configKeyValues \"$ARGS_ALL_CONFIG\" --ccdb-path=\"http://ali-calib-dcs.cern.ch:8083\" --sspec-min 1 --sspec-max 1 --name-extention dcs | "
+WORKFLOW+="o2-calibration-ccdb-populator-workflow $ARGS_ALL --configKeyValues \"$ARGS_ALL_CONFIG\" --ccdb-path=\"$DCSCCDBSERVER\" --sspec-min 1 --sspec-max 1 --name-extention dcs | "
 add_QC_from_consul "/o2/components/qc/ANY/any/mch-badchannel" ""
 WORKFLOW+="o2-dpl-run $ARGS_ALL $GLOBALDPLOPT"
 

DATA/production/calib/mft-noise-aggregator.sh

@@ -11,7 +11,7 @@ PROXY_INSPEC="A:MFT/DIGITS/0;B:MFT/DIGITSROF/0"
 WORKFLOW="o2-dpl-raw-proxy $ARGS_ALL --proxy-name mft-noise-input-proxy --dataspec \"$PROXY_INSPEC\" --network-interface ib0 --channel-config \"name=mft-noise-input-proxy,method=bind,type=pull,rateLogging=0,transport=zeromq\" | "
 WORKFLOW+="o2-calibration-mft-calib-workflow $ARGS_ALL --configKeyValues \"$ARGS_ALL_CONFIG\" --useDigits --prob-threshold 1e-5 --send-to-server DCS-CCDB  --path-CCDB \"/MFT/Calib/NoiseMap\" --path-DCS \"/MFT/Config/NoiseMap\"  | "
 WORKFLOW+="o2-calibration-ccdb-populator-workflow $ARGS_ALL --configKeyValues \"$ARGS_ALL_CONFIG\" --ccdb-path=\"http://o2-ccdb.internal\" --sspec-min 0 --sspec-max 0 | "
-WORKFLOW+="o2-calibration-ccdb-populator-workflow $ARGS_ALL --configKeyValues \"$ARGS_ALL_CONFIG\" --ccdb-path=\"http://ali-calib-dcs.cern.ch:8083\" --sspec-min 1 --sspec-max 1 --name-extention dcs | "
+WORKFLOW+="o2-calibration-ccdb-populator-workflow $ARGS_ALL --configKeyValues \"$ARGS_ALL_CONFIG\" --ccdb-path=\"$DCSCCDBSERVER\" --sspec-min 1 --sspec-max 1 --name-extention dcs | "
 WORKFLOW+="o2-dpl-run $ARGS_ALL $GLOBALDPLOPT"
 
 if [ $WORKFLOWMODE == "print" ]; then

DATA/production/calib/mid-badchannels.sh

@@ -26,7 +26,7 @@ if [[ -z ${CCDB_POPULATOR_UPLOAD_PATH} ]]; then
         CCDB_POPULATOR_UPLOAD_PATH_DCS="$CCDB_POPULATOR_UPLOAD_PATH"
     else
         CCDB_POPULATOR_UPLOAD_PATH="http://o2-ccdb.internal"
-        CCDB_POPULATOR_UPLOAD_PATH_DCS="http://alio2-cr1-flp199.cern.ch:8083"
+        CCDB_POPULATOR_UPLOAD_PATH_DCS="$DCSCCDBSERVER"
     fi
 fi
 if [[ "${GEN_TOPO_VERBOSE:-}" == "1" ]]; then

DATA/testing/detectors/MID/mid-calib-workflow.sh

@@ -7,7 +7,7 @@ WORKFLOW="o2-dpl-raw-proxy $ARGS_ALL --dataspec \"$MID_RAW_PROXY_INSPEC\" --inje
 WORKFLOW+="o2-mid-raw-to-digits-workflow $ARGS_ALL $MID_RAW_TO_DIGITS_OPTS | "
 WORKFLOW+="o2-mid-calibration-workflow $ARGS_ALL | "
 WORKFLOW+="o2-calibration-ccdb-populator-workflow $ARGS_ALL --configKeyValues \"$ARGS_ALL_CONFIG\" --ccdb-path=\"http://o2-ccdb.internal\" --sspec-min 0 --sspec-max 0 | "
-WORKFLOW+="o2-calibration-ccdb-populator-workflow $ARGS_ALL --configKeyValues \"$ARGS_ALL_CONFIG\" --ccdb-path=\"http://alio2-cr1-flp199.cern.ch:8083\" --sspec-min 1 --sspec-max 1 --name-extention dcs | "
+WORKFLOW+="o2-calibration-ccdb-populator-workflow $ARGS_ALL --configKeyValues \"$ARGS_ALL_CONFIG\" --ccdb-path=\"${DCSCCDBSERVER:-http://alio2-cr1-flp199-ib:8083}\" --sspec-min 1 --sspec-max 1 --name-extention dcs | "
 WORKFLOW+="o2-dpl-run $ARGS_ALL $GLOBALDPLOPT"
 
 if [ "$WORKFLOWMODE" == "print" ]; then